EasyManua.ls Logo

Fujitsu PRIMERGY RX300 S7 - Hardware Installation; CAUTION! General Safety

Fujitsu PRIMERGY RX300 S7
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RX300 S7 Operating Manual 51
5 Hardware installation
V CAUTION!
Follow the safety instructions in the chapter "Important information"
on page 37.
Do not expose the server to extreme environmental conditions (see
"Ambient conditions" on page 29). Protect the server from dust,
humidity and heat.
Make sure that the server is acclimatized for the time indicated in this
table before putting it into operation.
In the table "Acclimatization time", the temperature difference refers
to the difference between the operating environment temperature and
the temperature to which the server was exposed previously (outside,
transport or storage temperature).
Temperature difference (°C) Minimum acclimatization time
(hours)
53
10 5
15 7
20 8
25 9
30 10
Table 1: Acclimatization time

Table of Contents

Other manuals for Fujitsu PRIMERGY RX300 S7

Related product manuals