Fujitsu PRIMERGY ServerView Suite User Manual

ServerView Remote Management Frontend 17
Starting the Remote Management Frontend Requirements
The management port of the RSB S2/ RSB S2 LP (3HU) on the managed
server should be configured to the default value 3172.
I Since the Operations Manager does not know the management port
value, the Remote Management Frontend works with the default
value.
Since a connection is not automatically established when the Remote
Management Frontend is started, you can correct any nonstandard
value for the management port after the Remote Management
Frontend has been started.
– BMC
The BMC must be configured for an IPMI-over-LAN connection and console
redirection.
– RemoteView Management Blade
The management port of the RemoteView Management Blade on the
managed server should be configured to the default value 3172.
I Since the Operations Manager does not know the management port
value, the Remote Management Frontend works with the default
value.
Since a connection is not automatically established when the Remote
Management Frontend is started, you can correct any nonstandard
value for the management port after the Remote Management
Frontend has been started.
3.1.2 Requirements at the remote workstation
The following must be enabled in the web browser:
–Java
–JavaScript

Fujitsu PRIMERGY ServerView Suite Specifications

General

Brand	Fujitsu
Model	PRIMERGY ServerView Suite
Category	Server
Language	English