30 ServerView Remote Management Frontend
... starting via the Operations Manager Remote Management Frontend
3.2.3 Starting Remote Management Frontend via a
RemoteView Management Blade
Proceed as follows:
Ê In the ServerList window (see figure 2 on page 19), click the name of the
blade server ( ) that you want to manage with the Remote Management
Frontend
The Blade Server View [server-name] window opens:
Figure 11: Operations Manager: Blade Server View [server-name] window
Ê Under Information/Operation, choose
Maintenance - Remote Management Telnet to start the Remote Management
Frontend.
I The Remote Management Telnet-Link is only activated if, in the
Displayed Data: box, display of the online data (Online Data) (1) has
been set. If the display of the archive data has been set (Archive Data)
then the Remote Management Telnet-Link is not activated.
To Next Page
Loading...
