ServerView Remote Management Frontend 19
Remote Management Frontend ... starting via the Operations Manager
Ê On the main page of the Operations Manager, click the link ServerList under
the entry “ServerList”.
The ServerList window is displayed (see figure 2).
Figure 2: Operations Manager: “Server List” window
Access to the Remote Management Frontend varies depending on the Remote
Management hardware that is present at the server:
– For managed servers with iRMC/ iRMC S2:
Access via the Operations Manager window (see section “Starting the
Remote Management Frontend via an iRMC/ iRMC S2” on page 20).
– For managed servers with RSB/ RSB S2/ RSB S2 LP (3HU) and/or BMC:
Access via the Operations Manager window (see section “Starting Remote
Management Frontend via an RSB/ RSB S2/ RSB S2 LP(3HU) or a BMC”
on page 25).
– For managed blade servers ( ) with RemoteView Management Blade:
Access via the Blade Server View window (see section “Starting Remote
Management Frontend via a RemoteView Management Blade” on page 30).
To Next Page
Loading...
