22 ServerView Remote Management Frontend
... starting via the Operations Manager Remote Management Frontend
Figure 5: Operations Manager: Remote Management view (server can be managed)
I The remote management buttons (2) are only displayed if, in the
Displayed Data: box, display of the online data (Online Data) (1) has been
set.
If the display of the archive data has been set (Archive Data) then the
buttons are not displayed.
I All the supported buttons are displayed in figure 5 (maximum configu-
ration). By default, the iRMC Power Management button is not displayed.
For detailed information on configuring the buttons, see section “Config-
uring multisession support, SSH access and console redirection” on
page 11.
(1)
(2)
To Next Page
Loading...
