ServerView Remote Management Frontend 7
Preface Overview
The interface provided by the Remote Management Frontend for the
remote management of PRIMERGY servers:
Depending on the hardware available for remote management on the individual
managed servers, the Remote Management Frontend provides the following
interfaces for web-based access to the managed servers.
● Telnet-based interface (Remote Manager)
Depending on the managed PRIMERGY server, the connection may be
established via
– an iRMC/ iRMC S2 or
– an RSB/ RSB S2/ RSB S2 LP (3HU) with firmware version 6.4.57.29 or
higher.
● Telnet-based interface (Console Menu) via a RemoteView Management
Blade
● SSH-based interface (Remote Manager) via an iRMC/ iRMC S2.
● Interface for power management and console redirection (IPMI (1.5)-over-
LAN-based) via a Kalypso BMC (BMC - firmware version 2.x or higher)
● Interface for power management (IPMI (2.0)-over-LAN-based) and console
redirection (via SOL) via
– an iRMC/ iRMC S2 or
– a BMC of the RX/TX 600 S2/S3
To Next Page
Loading...
Need help?
General