TX100 S3 Operating Manual 57
Starting up and operation
Other On/Off options
Besides the On/Off button, the server can be switched ON and OFF in the
following ways:
– Timer-controlled switch-on/off
Using the ServerView Operations Manager, you can configure that the
server is switched on/off controlled by timer.
– Ring indicator
The server is switched on by an internal or external modem.
– Wake up On LAN (WOL)
The server is switched on by a command via the LAN (Magic Packet
TM
)
(LAN1 only).
– After power failure
The server automatically reboots following a power failure (depending on the
settings in the BIOS).
To Next Page
Loading...
Need help?
General