EasyManuals Logo

Fujitsu PRIMERGY TX140 S2 User Manual

Fujitsu PRIMERGY TX140 S2
86 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
TX140 S2 Operating Manual 19
Functional overview
Accessible drives
The server has three 5.25-inch bays that can be used in various ways:
The individual bays can be equipped with any 3.5-inch drives (height:1.6 inch).
You can install a multibay (DVD-LSD/LSP) in the top bay. You can install a
slimline DVD drive and the ServerView Local Service Display or ServerView
Local Service Panel in the multibay (DVD-LSD/LSP).
As an option for the top bay, a slimline DVD / backup drive cage is available.
I Please note the following:
A DVD drive must have been installed in order to operate the server.
The accessible drives cannot be replaced during operation.
You are required to open the drive cover of system when you access
to the 5.25 inch drives.
Power supply
In its basic configuration the server has a standard power supply unit or a hot-
plug power supply unit that adjusts automatically to any mains voltage in the
range 100 V - 240 V. Besides the hot-plug power supply unit, a second hot-plug
power supply unit can be installed optionally to serve as a redundant power
supply. If one power supply unit fails, the second power supply unit in the
redundant configuration ensures operation can continue uninterrupted.

Table of Contents

Other manuals for Fujitsu PRIMERGY TX140 S2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu PRIMERGY TX140 S2 and is the answer not in the manual?

Fujitsu PRIMERGY TX140 S2 Specifications

General IconGeneral
BrandFujitsu
ModelPRIMERGY TX140 S2
CategoryServer
LanguageEnglish

Related product manuals