Fujitsu PRIMERGY TX140 S2 - Configuring the Server and Installing the Operating System Without the Serverview Installation Manager

76 Operating Manual TX140 S2
Starting up and operation
6.4.4 Configuring the server and installing the operating
system without the ServerView Installation
Manager
Configure onboard SATA controller
Configure the controller as described in section "Configuring the onboard SATA
controller" on page 73.
Configure SAS/SATA RAID controller with "MegaRAID functionality"
Configure the controller as described in section "Configuring the SAS/SATA
RAID controller" on page 74.
Installing the operating system
Ê Insert the CD/DVD for the operating system you want to install.
Ê Reboot the server.
Ê Follow the instructions on screen and in the manual for the operating
system.