Fujitsu PRIMERGY TX140 S2 User Manual

Operating Manual TX140 S2
Contents
5.5 Connecting the server to the mains . . . . . . . . . . . . . . 53
5.5.1 Using cable ties (standard PSU) . . . . . . . . . . . . . . . . . 54
5.5.2 Using cable ties (hot-plug PSU) . . . . . . . . . . . . . . . . . 55
5.6 Notes on connecting/disconnecting cables . . . . . . . . . . 56
6 Starting up and operation . . . . . . . . . . . . . . . . . . . . 59
6.1 Access to the drives (floorstand model) . . . . . . . . . . . . 59
6.1.1 Enabling access to the accessible drives . . . . . . . . . . . . . 59
6.1.2 Enabling access to the HDD modules . . . . . . . . . . . . . . 61
6.2 Control elements and indicators . . . . . . . . . . . . . . . . 62
6.2.1 Front of the server . . . . . . . . . . . . . . . . . . . . . . . . 62
6.2.1.1 ID card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
6.2.1.2 Control elements . . . . . . . . . . . . . . . . . . . . . . . 64
6.2.1.3 Indicators on the control panel . . . . . . . . . . . . . . . . 65
6.2.1.4 Indicators on the drives . . . . . . . . . . . . . . . . . . . . 66
6.2.2 Rear of server . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
6.2.2.1 Indicators on the connector panel . . . . . . . . . . . . . . . 68
6.3 Switching the server on and off . . . . . . . . . . . . . . . . 71
6.4 Configuring the server . . . . . . . . . . . . . . . . . . . . . 73
6.4.1 Configuring the onboard SATA controller . . . . . . . . . . . . . 73
6.4.2 Configuring the SAS/SATA RAID controller . . . . . . . . . . . . 74
6.4.3 Configuring the server and installing the operating system
with the ServerView Installation Manager . . . . . . . . . . . . . 75
6.4.4 Configuring the server and installing the operating system
without the ServerView Installation Manager . . . . . . . . . . . 76
6.5 Cleaning the server . . . . . . . . . . . . . . . . . . . . . . . 77
7 Property and data protection . . . . . . . . . . . . . . . . . . 79
7.1 BIOS Setup security functions . . . . . . . . . . . . . . . . . 79
8 Troubleshooting and tips . . . . . . . . . . . . . . . . . . . . 81
8.1 Power-on indicator remains unlit . . . . . . . . . . . . . . . . 81
8.2 Server switches itself off . . . . . . . . . . . . . . . . . . . . 82
8.3 Screen remains blank . . . . . . . . . . . . . . . . . . . . . . 82

Fujitsu PRIMERGY TX140 S2 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX140 S2
Category	Server
Language	English