What to do if my Fujitsu S26361-K1577-V140 says 'No Signal'?
If your Fujitsu Monitor displays a 'No Signal' message, first, ensure the data cable is securely connected to the monitor port on your computer. Also, verify that your computer is powered on.
Why is my Fujitsu Monitor screen black but the power light is on?
If your Fujitsu Monitor's power indicator is lit but there's no screen display, try the following: * Ensure that the computer is switched on. * Verify the monitor's data cable is correctly attached to the computer. * Press any key on the keyboard in case the computer is in power saving mode. * Adjust the brightness and/or contrast settings.
How to fix a Fujitsu S26361-K1577-V140 when there is no screen display and the power indicator is off?
If your Fujitsu Monitor screen is not displaying anything and the power indicator is off, check that the monitor's power cable is correctly connected. Also, ensure that the computer is switched on.
What to do if my Fujitsu S26361-K1577-V140 Monitor picture is shaking?
If the picture on your Fujitsu Monitor is shaking, check that the data cable is correctly attached to the monitor port on the computer. If the issue persists, press the AUTO button to perform an auto-adjustment of the screen.
How to fix 'Frequency out of range' error on Fujitsu S26361-K1577-V140?
If your Fujitsu Monitor displays 'Frequency out of range', it means the input signal doesn't match the monitor's technical specifications. Adjust the video frequency range using your computer's software, referring to its documentation. Alternatively, set a different screen resolution using the computer software.
How to resolve vertical lines on my Fujitsu S26361-K1577-V140 screen?
If your Fujitsu Monitor has picture disturbances such as vertical lines, press the AUTO button to conduct the auto-adjustment of the screen.
How to get rid of horizontal lines or picture noise on Fujitsu S26361-K1577-V140 Monitor?
If your Fujitsu Monitor is showing horizontal lines or picture noise, press the AUTO button to conduct the auto-adjustment of the screen.
Why is the picture position not correct on my Fujitsu S26361-K1577-V140 Monitor?
If the picture position on your Fujitsu Monitor is not correct, it might be recognizing an undefined mode. Press the AUTO button to conduct the auto-adjustment of the screen.
How to fix wrongly adjusted picture on Fujitsu S26361-K1577-V140?
If the picture on your Fujitsu Monitor is wrongly adjusted, run the Factory Recall function in the OSD menu. The Auto Processing message will appear.
Why is my Fujitsu S26361-K1577-V140 screen getting darker?
If your Fujitsu Monitor screen becomes darker, it could be due to the background lighting reaching the end of its lifespan. Contact our Service Desk.
General| Aspect Ratio | 16:9 |
|---|---|
| Brightness | 250 cd/m² |
| Connectivity | VGA, DVI-D |
| Color Support | 16.7 million colors |
| Power Consumption | 25W (typical) |
| Resolution | 1920 x 1080 pixels |
| Input Ports | VGA, DVI-D |
Crucial safety precautions and warnings for operating the display.
Steps for unpacking the monitor and verifying package contents.
Basic instructions for physically positioning and setting up the monitor.
Instructions for attaching the monitor stand to the display.
General guidance on connecting the monitor to power and sources.
Details on connecting video, USB, and audio cables to the monitor.
Instructions for connecting the monitor's data cables to the PC.
How to power the monitor on, off, and understand status indicators.
Using physical buttons to access and adjust monitor settings directly.
Choosing between different video input sources (VGA, DVI, HDMI, DP).
Navigating the OSD menu for comprehensive display adjustments.
Steps to resolve issues when the monitor screen remains blank.
Troubleshooting steps for when the monitor detects no input signal.
How to fix issues caused by unsupported horizontal or vertical frequencies.
Guidance on fixing incorrect image placement on the screen.
Steps to resolve issues with unstable or vibrating image display.
How to correct display settings that are improperly configured.
To Next Page