Reading of Model Information in This Manual
If you are using iX1600, iX1400 or iX1300, read the model information as follows.
l When you are using iX1600
Read the model name "iX1500" as "iX1600".
l When you are using iX1400
Read the model name "iX1500" as "iX1400".
However, iX1400 does not support the function for wireless LAN connection. Skip over
descriptions about wireless LAN.
l When you are using iX1300
Read the model name "iX1500" as "iX1300".
However, iX1300 has the following two scanning methods: "U-turn Scan" and "Return Scan"
For details about how to perform a scan, refer to here in the Basic Operation Guide.
Because there are two scanning methods for iX1300, the setting items in the ScanSnap setup
window for the iX1300 are different which are shown below.
- [Scanning] tab
l The [Feed option] button is displayed.
You can specify a feeding method for U-turn Scan and Return Scan in the [Feed option]
window that appears when you click the [Feed option] button.
l The [Merge both side images] checkbox is displayed in the [Scanning mode option]
window that appears when you click the [Option] button.
You can automatically merge the front and back side of an image created by scanning a
document using Return Scan and save the merged image as a single image.
For details, refer to here in the Basic Operation Guide.
- [Paper] tab
The available setting items for each scanning method (U-turn Scan and Return Scan) are
displayed.
References for Latest Information on the ScanSnap
l Information on Hardware
For the latest information on the setup procedure, basic operations, and the cleaning procedure
for the ScanSnap, refer to Basic Operation Guide.
To read the Basic Operation Guide in an environment in which the computer is not connected to
the Internet, download the PDF version of the manual from here in an environment in which the
computer is connected to the Internet.
l Information on Software
For details about the supported operating systems for the software, refer to here.
For details about the software that can be used with the ScanSnap, refer to here.
Reading of Model Information in This Manual
4
To Next Page
Loading...
Need help?
General
Weight and Dimensions
