Fujitsu ScanSnap S1300

Installing in Windows
36
Installing in Windows
This section explains how to install the software in Windows.
■ System requirements
*1 : Service Pack 1 or later required on S1300i/S1100.
*2 : Service Pack 2 or later required on S1500/S1500M/S1300.
Service Pack 3 or later required on S1300i/S1100.
*3 : Service Pack 4 or later required.
Windows 2000 is not supported on S1300i/S1100.
Evernote for Windows and Adobe Acrobat X Standard are not supported.
*4 : When the font size is large, some screens may not be displayed properly.
In that case, use a smaller font size.
*5 : Bundled with S1500.
*6 : When using a USB 3.0 port, data is transferred at the same speed as USB 2.0.
Operating system
Windows 7
(32 bit/64 bit)
Windows Vista
(*1) (32 bit/64 bit)
Windows XP
(*2) (32 bit)
Windows 2000
(*3)
CPU
Intel
®
Pentium
®
4 1.8 GHz or higher
(Recommended: Intel
®
Core™2 Duo 2.2 GHz or higher)
Memory
32 bit: 1 GB or more
64 bit: 2 GB or more
512 MB or more (Recommended: 1 GB or more)
Display
resolution
800 × 600 pixels or higher (*4)
Hard disk space
Disk space required to install the software bundled with the ScanSnap is as follows:
z ScanSnap Manager: 600 MB
z ScanSnap Organizer: 620 MB
z CardMinder: 280 MB
z ABBYY FineReader for ScanSnap: 600 MB
z Evernote for Windows: 150 MB
z Scan to Microsoft SharePoint: 40 MB
z Adobe Acrobat X Standard (*5): 1130 MB
USB port (*6) USB2.0 / USB1.1