Fujitsu ScanSnap S1300

Installing in Mac OS
56
Installing in Mac OS
This section explains how to install the software in Mac OS.
■ System requirements
*1 : It is recommended to apply the latest updates to the Mac OS.
*2 : Not supported on S1300i.
Evernote for Mac is not supported for versions earlier than Mac OS X v10.5.8.
*3 : S1300i can be operated on Mac with Intel
®
Processor.
*4 : When using Mac OS X v10.7, you need to update to the latest version (3.0 or later) after you
installed Evernote for Mac.
*5 : Bundled with S1500M.
When using Mac OS X v10.7, you need to use an Adobe Acrobat version which supports Mac
OS X v10.7.
For information about the Adobe Acrobat versions officially supported on Mac OS X v10.7,
visit the website of Adobe Systems Incorporated.
*6 : When using a USB 3.0 port, data is transferred at the same speed as USB 2.0.
Operating system
(*1)
Mac OS X v10.7 Mac OS X v10.6 Mac OS X v10.5
Mac OS X v10.4
(*2)
CPU
(*3)
Intel
®
Core™ Duo 1.83 GHz or higher
(Recommended: Intel
®
Core™2 Duo 2.4 GHz or higher)
PowerPC
®
G5 1.6 GHz
Memory 2 GB or more 1 GB or more
512 MB or more
(Recommneded: 1 GB or more)
Display
resolution
1024 × 768 pixels or higher
Hard disk space
Disk space required to install the software bundled with the ScanSnap is as follows:
z ScanSnap Manager: 800 MB
z ABBYY FineReader for ScanSnap: 570 MB
z Cardiris: 130 MB
z Evernote for Mac (*4): 55 MB
z Adobe Acrobat 9 Pro (*5): 1540 MB
USB port (*6) USB2.0 / USB1.1
ATTENTION
z If the system requirements above are not satisfied, the ScanSnap may not operate.
z Do not use the USB port on the keyboard or the monitor to connect the ScanSnap (it may not function
properly).
z Make sure to use a powered hub equipped with an AC adapter if you are using a commercially
available USB hub.
z Scanning speed will slow down in the following cases:
- The CPU or the memory do not meet the required specifications
- The version of the USB port or the USB hub is USB 1.1
z A disk space approximately three times larger than the resulting scanned file size is required when
scanning documents.