Fujitsu ScanSnap S1500 - About This Manual

4
■ System Requirements
*1: Service Pack 2 or later is required
*2: Service Pack 4 or later is required
*3: For Windows Vista
®
, if .NET Framework 3.5 SP1 is
not installed, a maximum of 500 MB of additional free
hard disk space is required for it.
For Windows
®
XP, if .NET Framework 3.5 SP1 is not
installed, a maximum of 530 MB of additional free
hard disk space is required for it.
For Windows
®
2000, if .NET Framework 2.0 is not
installed, a maximum of 310 MB of additional free
hard disk space is required for it.
*4: When using USB 3.0 port, it works as USB 2.0.
■ Installation
1. Turn on the computer and log on as a user
with Administrator privileges.
2. Insert the Setup DVD-ROM into the DVD-
ROM drive.
⇒ The [ScanSnap Setup] dialog box appears.
3. Click the [Install Products] button.
⇒ The [Install Products] dialog box appears.
4. Click the [ScanSnap] button.
Follow the instructions on the screen to
continue with the installation.
If installation is not completed successfully, click the
[Manuals] button in the [ScanSnap Setup] dialog box, and
then the [Troubleshooting (installation)] button, and refer
to Troubleshooting (installation).
Operating
system
• Windows
®
7 (32-bit/64-bit)
• Windows Vista
®
(32-bit/64-bit)
• Windows
®
XP (32-bit) (*1)
• Windows
®
2000 (*2)
CPU
Intel
®
Core
™
2 Duo 2.2 GHz or higher
recommended
(Minimum: Intel
®
Pentium
®
4 1.8 GHz)
Memory
Windows
®
7 (32-bit/64-bit)
32-bit: 1 GB or more
64-bit: 2 GB or more
Windows Vista
®
(32-bit/64-bit)
Windows
®
XP (32-bit)
Windows
®
2000
512 MB or more
(1 GB or more recommended)
Display
resolution
800 × 600 pixels or higher
Hard disk
space
(*3)
3350 MB or more of free hard disk space
(3800 MB or more of free hard disk space
is required for using with Rack2-Filer)
USB port
(*4)
USB 2.0 / USB 1.1
• If the CPU or the memory do not meet the
required specifications, or the type of USB port
or USB hub is USB 1.1, the scanning speed will
slow down.
• When the font size is large, some screens may
not be displayed properly. In that case, use a
smaller font size.
• The actual increase in used disk space after
installation and the required disk space for
installation may differ from each other
depending on your Windows
®
system disk
management.
If the [ScanSnap Setup] dialog box does
not appear, double-click "ScanSnap.exe" in
the DVD-ROM via Windows Explorer.