Fujitsu ScanSnap S1500 - Scan Test

7
6. Check the ScanSnap Manager icon.
⇒ The ScanSnap Manager icon appears on the
taskbar.
⇒ The ScanSnap Manager icon appears in the
Dock.
Scan Test
For details on documents that can be scanned with the
ScanSnap and how to load documents, refer to
"ScanSnap Overview" in the Operator's Guide.
1. Load the test documents into the
ScanSnap.
1. Pull the stacker on the ADF top section
towards you.
2. Prepare to load the document as follows.
3. Load the test documents on the ADF paper
chute (cover), and adjust the side guides to
the size of the documents.
2. Press the [Scan] button on the ScanSnap.
⇒ Scanning starts. The Quick Menu appears
when scanning is completed.
In Windows
®
7, the ScanSnap Manager
icon is displayed in the menu which
appears when you click on the taskbar.
To have the ScanSnap Manager icon
always displayed on the taskbar, drag the
icon and drop it onto the taskbar.
Stacker
If scanning does not start, refer to
"Troubleshooting" in the ScanSnap
Manager Help.
Raise the
stacker
Pull out the extension
Open the side
guides
Set the documents
face-down and top-first