Fujitsu ScanSnap S1500 - Mac os Installation

5
■ Software
You can install the following software.
• ScanSnap Manager (Scanner driver)
• ABBYY FineReader for ScanSnap™ (OCR
application)
• Cardiris™ for ScanSnap (Business card text-
recognized application)
To use Evernote for Mac, SugarSync Manager for Mac,
or Adobe
®
Acrobat
®
9 Pro, the required software should
also be installed.
For details about each software and its installation
procedures, refer to "Installing the Software" in the
Operator's Guide.
■ System Requirements
*1: It is recommended to apply the latest updates to Mac
OS.
*2: When using USB 3.0 port, it works as USB 2.0.
■ Installation
1. Turn on the computer and log in as a user
with Administrator privileges.
2. Insert the Setup DVD-ROM into the DVD-
ROM drive.
⇒ The [ScanSnap] window appears.
3. Double-click the [ScanSnap] icon.
Follow the instructions on the screen to
continue with the installation.
Mac OS Installation
Operating
system (*1)
• Mac OS X v10.7
• Mac OS X v10.6
• Mac OS X v10.5
• Mac OS X v10.4
CPU
Intel
®
Core™ 2 Duo 2.4 GHz or higher
recommended
(Minimum: Intel
®
Core™ Duo 1.83
GHz, PowerPC
®
G5 1.6 GHz)
Memory
Mac OS X v10.7
2 GB or more
Mac OS X v10.6
1 GB or more
Mac OS X v10.5
Mac OS X v10.4
512 MB or more
(1 GB or more recommended)
Display
resolution
1024 × 768 pixels or higher
Hard disk
space
3095 MB or more of free hard disk
space
USB port
(*2)
USB 2.0 / USB 1.1
If the CPU or the memory do not meet the
required specifications, or the type of USB port
or USB hub is USB 1.1, the scanning speed will
slow down.