Fujitsu ScanSnap S510 Cleaning Instructions


Plastic Rollers x 4
Clean lightly while rotating with your finger. Take care not to roughen the surface.
For further information please refer to the
ScanSnap S510/S510M Operators Guide
which can be found on our Website:
http://www.fujitsu.com/emea/products/
January 2010
Using F1 Impregnated Cleaning Wipes
Eject Rollers x 2
Clean lightly taking care not to roughen the surface.

Turn the Scanner ON while cleaning the following locations
PFU Imaging Solutions Europe Ltd
Cleaning Instructions for ScanSnap S510/S510M





Plastic Rollers
Eject Rollers
Feed Rollers
Glass
Pick Roller
Pad Assy

To rotate the Feed and Eject Rollers, press the POWER button while holding down the SCAN button.
As a guideline, six presses of the POWER button makes the rollers rotate one full turn.
While holding down the SCAN button 
Press the POWER button 
Each press of the POWER button will
cause the rollers to rotate

Fujitsu ScanSnap S510 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 356 mm
Scanner type	Sheet-fed scanner
Sensor type	CCD
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	50 sheets
USB version	2.0
Standard interfaces	USB 2.0
Minimum storage drive space	512 MB
Minimum system requirements	Windows 2000/ XP/ Vista
Sustainability certificates	ENERGY STAR
Power requirements	AC 100V to 240V, 50 / 60 Hz
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Weight	2700 g