To Next PageTo Next Page
Need help?Do you have a question about the Fujitsu ScanZen Eco Series and is the answer not in the manual?
The main scanning device unit.
Accessory for feeding documents into the scanner.
Power adapter connection point.
Converts wall power for the scanner.
Connects scanner to computer for data transfer.
Card with links to software and support resources.
First step to remove external protective materials and tape from the scanner.
Second step to remove internal protective materials and tape from the scanner.
Third step to remove protective packaging and tape from internal scanner parts.
Attach the Automatic Document Feeder (ADF) paper chute to the scanner.
Details the necessary CPU, Memory, Hard Disk Drive, and Display specifications.
Lists compatible Windows operating system versions for the scanner.
Ensure you are logged into Windows with administrator privileges for installation.
Download the specific PaperStream IP (TWAIN) driver file for ScanZen.
Quit all other running applications on your computer before installation.
Execute the downloaded driver file to begin the installation process.
Follow the on-screen prompts of the Installation Wizard to complete.
Connect the AC adapter and USB cable to the scanner and computer.
Press and hold the power button for at least 2 seconds to turn on the scanner.
Lists software options like PaperStream Capture Lite and ABBYY FineReader Sprint.
Steps to download and run the Software Download Tool for installation.
Insert a document into the scanner's input tray.
Position the document face down and upside down in the feeder.
Open the PaperStream Capture Lite application on your computer.
Initiate scanning by feeding the document through the scanner.
Check the scanned image displayed in the PaperStream Capture Lite software.
General