Check indicator
Lights or flashes in orange when an error occurs.
Scan/stop button (*1)
Starts up the linked application.
Cancels the scan.
Power button
Turns the power on/off.
*1: For details about how to scan by pressing the scan/stop button, refer to the scanner driver's Help (included in the Setup DVD-ROM) or "Using a
Button on the Scanner to Start Scanning" (page 46).
Power indicator
Lights in green when the scanner is on.
This indicator flashes immediately after the scanner is turned on, or
when resuming from power saving mode.
To Next Page
Loading...
Need help?
General