Chapter 5 Daily Care
54
Appendix
Glossary
Contents
TOP
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Index
Introduction
Brake roller (× 2)
Remove the roller from the scanner.
For details about removing the brake roller, refer to "6.2 Replacing the
Roller Set" (page 59).
Gently wipe the surface of the rollers.
Pick roller (× 6)
Gently wipe the surface as you rotate the roller manually, taking care not
to damage the roller surface. Make sure that it is cleaned properly
because residue on the roller will affect the feeding performance.
Plastic idler roller (× 4)
Gently wipe the surface as you rotate the roller manually, taking care not
to damage the roller surface. Make sure that it is cleaned properly
because residue on the roller will affect the feeding performance.
Glass (× 2)
Gently wipe dirt and dust off the surface of the glass sections.
ATTENTION
Make sure that the cloth does not get caught and damage the
document sensors.
ATTENTION
Vertical streaks may appear on a scanned image when the glass is dirty.
To Next Page
Loading...
Need help?
General