Chapter 7 Troubleshooting
75
Appendix
Glossary
Contents
TOP
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Index
Introduction
When the scanner is turned on, the check
indicator on the operator panel turns on or
flashes.
Does the check indicator on the operator panel turn on or
flash after the power is turned off then on again?
No
The scanner is operating correctly.
Yes
Check the indicator status according to "7.2 Error Indications on Operator Panel"
(page 65) and take appropriate measures.
If the problem persists, check the items in "7.4 Before You Contact the Scanner
Service Provider" (page 82) first, then contact your FUJITSU scanner dealer or an
authorized FUJITSU scanner service provider.
To Next Page
Loading...
Need help?
General