Glossary
113
Appendix
Glossary
Contents
TOP
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Index
Introduction
Pre-pick
Refers to feeding a document in a position to start scanning.
It shortens the interval between setting the document and feeding the document to the starting position.
R
Resolution
A measurement to indicate the quality (fineness) of an image. Resolution is displayed by the number of pixels per inch.
Since image data is a collection of small dots (pixels), if the same image contains different amount of pixels, the one with
more pixels can express greater details. Therefore, the higher the resolution is, the finer the image becomes.
S
Simplex scanning mode
A mode for scanning only one side (front or back) of a document. ( Duplex scanning mode)
Smoothing
Refers to the removal of irregularities on diagonal lines and curves, which is a processing method commonly used in OCR
applications.
T
Temporary error
An error that can be fixed by the user.
Threshold
The value which is used to determine whether a certain color is black or white. Threshold value must be configured in order
to scan images with grayscale gradation. Each pixel is converted into black or white according to the specified value.
TWAIN
TWAIN (Technology Without Any Interesting Name) is an API (Application Program Interface) standard for imaging devices
(e.g. scanners, digital cameras) developed by TWAIN Working Group. In order to use devices that comply with this
standard, it is necessary to install a driver software that supports TWAIN standard.
To Next Page
Loading...
Need help?
General