Fujitsu SP-1130 User Manual

Chapter 8 Operational Settings
94
Appendix
Glossary
Contents
TOP
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Index
Introduction
The Software Operation Panel allows the configuration of the
following settings for the scanner that is connected to the
computer.
Device Setting
1 Start up the Software Operation Panel.
For details, refer to "8.1 Starting Up the Software Operation Panel"
(page 86).
2 From the listing on the left, select [Device Setting].
Items that can be configured in the above dialog box are shown in the
next page.
8.3 Configuration Items

Fujitsu SP-1130 Specifications

General

ADF Capacity	50 sheets
Optical Resolution	600 dpi
Interface	USB 2.0
Scanner Type	Automatic Document Feeder (ADF)
Supported OS	Windows
Dimensions	298 x 135 x 133 mm
Paper Width	A4, Letter, Legal, A5, B5, Envelopes (DL, COM10)