Fujitsu UTY-VMSX - User Manual

[Original instructions]
中 文
Türkçe
Русский
Português
EλληvIkά
Italiano
Español
Français
Deutsch
English
INSTALLATION MANUAL
MODBUS CONVERTOR FOR INDOOR UNIT
For authorized service personnel only.
INSTALLATIONSANLEITUNG
MODBUS-KONVERTER FÜR INNENGERÄT
Nur für autorisiertes Fachpersonal.
MANUEL D’INSTALLATION
CONVERTISSEUR MODBUS POUR UNITÉ INTÉRIEURE
Pour le personnel agréé uniquement.
MANUAL DE INSTALACIÓN
CONVERTIDOR MODBUS PARA LA UNIDAD INTERIOR
Únicamente para personal de servicio autorizado.
MANUALE DI INSTALLAZIONE
CONVERTITORE MODBUS PER UNITÀ INTERNE
A uso esclusivo del personale tecnico autorizzato.
ΕΓΧΕΙΡΙΔΙΟ ΕΓΚΑΤΑΣΤΑΣΗΣ
ΜΕΤΑΤΡΟΠΕΑΣ MODBUS ΓΙΑ ΕΣΩΤΕΡΙΚΉ ΜΟΝΆΔΑ
Μόνο για εξουσιοδοτημένο τεχνικό προσωπικό.
MANUAL DE INSTALAÇÃO
CONVERSOR MODBUS PARA UNIDADE INTERIOR
Apenas para técnicos autorizados.
РУКОВОДСТВО ПО УСТАНОВКЕ
КОНВЕРТОР MODBUS ДЛЯ ВНУТРЕННЕГО МОДУЛЯ
Только для авторизованного обслуживающего персонала.
MONTAJ KILAVUZU
İÇ ÜNITE IÇIN MODBUS DÖNÜŞTÜRÜCÜ
Yalnızca yetkili servis personeli için.
安装说明书安装说明书
室内机用 Modbus 信号转换器
仅针对授权的专业维修人员。
PART NO. 9374707140-03
UTY-VMSX
9374707140-03_IM.indb 19374707140-03_IM.indb 1 6/26/2019 1:57:30 PM6/26/2019 1:57:30 PM

Summary

Main Unit and Accessories

Main Unit and Accessories List

Lists the supplied installation parts including the main unit, manual, cable ties, screws, and connector cables for setup.

Electrical Requirements

MODBUS Cable Electrical Specifications

Details the required wire size and type for MODBUS cables, including maximum and minimum specifications.

Modbus Communication Specifications

Modbus Communication Parameters

Defines communication parameters like transfer mode, method, speed, data bits, parity, stop bit, and network type.

Installation Location and Wiring

Modbus Convertor Dimensions

Provides detailed dimensions and mounting hole specifications for the MODBUS convertor.

Wiring Method and System Diagram

Illustrates the proper wiring method and shows a system diagram for connecting the MODBUS convertor.

Unit Wiring Details

Explains the specific wiring for MODBUS cables and connectors, including torque specifications.

Installing the Modbus Convertor

Connecting Transmission Cables

Step-by-step guide for connecting transmission cables, including opening the cover and securing wires.

Circuit Board Setting

Instructions for setting DIP switches for MODBUS communication, including slave address.

Modbus Communication Settings

Details on setting baud rate, parity, stop bit, and terminal resistance for MODBUS communication.

Power and LED Display

Turning On The Power

Procedures and precautions for turning on the power after installation, including wiring checks.

Normal LED Indications

Describes the normal operational status indicated by LED lights (LED5, LED6, LED7).

Error LED Indications

Explains error codes and their corresponding LED indications for troubleshooting peripheral unit issues.

Fujitsu UTY-VMSX Specifications