EN
8
4 - Installation Instructions
Do not tip the range on its side when installing the legs.The
sidewalls are not designed to bear the weight of the range
and will bend. Any damage as a result of tipping will not
be covered by warranty. Follow the method in the enclosed
installation Manual.
STEP 1
Cut the banding (1) and remove the Installation Instructions
from the top of range and read them carefully before you
begin.
CAUTION
Stand clear. The ends of the cut banding may snap toward you.
1
STEP 2
Open the top (2) and remove the accessories (3) then lift off
the cardboard sheath (4).
3
2
4
To Next Page
Loading...
