Emptying the Dust Cup
Warning: Empty the dust cup before the contents reach the bottom of the filter frame.
(Fig. 11) Over filling the dust cup may cause dirt and debris to clog the filter
and cause loss of suction.
Warning: Always unplug the vacuum from the electrical outlet before removing the
dust cup.
1. Turn the vacuum off and unplug the power cord from the wall outlet.
2. Remove the floor nozzle or crevice tool from the vacuum.
3. While holding the vacuum over a trash can, push the release button at the bottom of the
dust cup. The base of the dust cup will drop down, releasing the dirt. (Fig. 12)
4. Close the bottom of the dust cup, ensuring it locks into place. (Fig. 13) Replace the floor
nozzle or crevice tool and resume vacuuming.
Fig. 12
Fig. 13
Fig. 11
8
To Next Page
