It is to define t he inverte rset frequenc yandAcceleration /Deceleration time a tJogging opera tion.
Jogging operation i s performedby directstartmode and deceleration stop m ode.
The Jo gging A cce le ration ti me is the time requiredfor inverter to accelerate from 0Hzto the ma ximum
output frequency (F0.04).
The Jo gging Decelera ti ontime i s the t ime require dfor inverterto decelerate f rom the ma ximumoutput
frequency (F0.04) to 0Hz.
When th e set fr equency is wi thin th e skip frequency range, the actual op eratingfreq uen cy wi ll be
operated ne ar theboundary of skipfrequency range.
By me ansof setti ngskip freque ncy, thei nve rter can ke ep away fr om the me chanical resonancepoint
of the load.
This i nverter has one skip f requency point available.If t hese two s kip f requencies are both set to 0,
this function will be inactive.
Fig. 6-14 Skip frequency s chematic diagram
Setting frequency
Skip frequency
1/2 Skip frequency range
1/2 Skip frequency range
F4.02
Jogging frequen cy
0.00 F0.04
～
5.00Hz
F4.0 3
Jogging ACC EL tim e
0.1 36 0.0s
～
10.0s
F4. 04
Jogging DECEL time
0.1 36 0.0s
～
10.0s
Fu nction
Code
Name
Setting Range
Default
Value
F4.05
Skip fre quenc y
0.00 F0.04
～
0.00Hz
F4.0 6
Skip fre quenc y r ange
0.00 F0.04
～
0.00Hz
Fu nction
Code
Name
Setting Range
Default
Value
F4.07
Traverse fr equen cy range
0.0 100.0%
relative to set frequency
～
（）
0.0 %
F4.08
Kick f requ ency ran ge
0.0 50.0%(r elat ive to travers e
freq uency range)
～
0.0 %
F4.09
Traverse fr equen cy up
ti m e
0.1 360.0s
～
5.0s
F4.1 0
Traverse fr equen cy down
ti m e
0.1 360.0s
～
5.0s
Fu nction
Code
Name
Setting Range
Default
Value
Chapter 6 Parameter D escripti on
DZB Series
-56-
Accelerati on/Deceleration time can be chosen to be F 0.08, F0.09 or above three ti me se ttings. Their
meanings are all the s ame; please r ef er t o F0.08 and F0.09 related description.
The Acceleration/Decelerat ion time 0-1at inverter operation can bechosen t hroughdifferent
comb ina ti o n of m ult ifu nc tion d i g it al in put te rm ina ls .
F4Application Func tion Parameters
F3.14
0.0 0H z
F3.15
0.0A
F3.16
0.0V
The output frequency when current
fault happens
The output amperage when current
fault happens
The bu s vol tage whe n cur rent f au lt
happens
Operating frequency at
c urrent f aul t
Outp ut am perag e at
c urrent f aul t
Bus v olt age at c ur rent f ault
Funct ion
Code
Nam e
Description
Default
Valu e
F4.00 ACCEL Time 2
0.1 360.0s
～
10.0s
F4.01 DE CEL Time 2
0.1 360.0s
～
10.0s
Funct ion
Code
Nam e
SettingRange
Default
Valu e
Chapter 6 Parameter Descr iption
DZB S eri es
F3.17
0.0V
Sett ing del ay time(u p)
F3.18
0.0V
Sett ing uni t o f del ay time
Funct ion
Code
Nam e
SettingRange
Default
Valu e
0~999 9
0~3
(0:function of delay time invali d)
We also can use s et exter nal t erm inal fun cti on to s et delay tim e of F3.17 .
Setting unit o f delay ti me 0 :del ay ti me f unc tion i nvalid
1:the uni t of d elay time i s 0.1s
2:the unit of delay time 1s
3:the unit of del ay t ime 1min
-55-
BLUE ELEPHANT
BLUE ELEPHANT
BLUE ELEPHANT
BLUE ELEPHANT
BLUE ELEPHANT
BLUE ELEPHANT
BLUE ELEPHANT
BLUE ELEPHANT
BLUE ELEPHANT
BLUE ELEPHANT
BLUE ELEPHANT
BLUE ELEPHANT
BLUE ELEPHANT
BLUE ELEPHANT
BLUE ELEPHANT
BLUE ELEPHANT
BLUE ELEPHANT
BLUE ELEPHANT
BLUE ELEPHANT
BLUE ELEPHANT
BLUE ELEPHANT
BLUE ELEPHANT
BLUE ELEPHANT
BLUE ELEPHANT
To Next Page
Loading...