To Next PageTo Next Page
Need help?Do you have a question about the FULTON XLT 7.0 and is the answer not in the manual?
Emphasizes the importance of reading and following all manual instructions before use.
Lists the essential tools needed for installation and operation of the winch.
Crucial safety precautions to follow before the initial use of the winch.
Safety measures to take during the setup and installation phase of the winch.
Essential checks to ensure the winch is ready for safe and effective pulling operations.
Guidelines for safe operation while the winch is under load.
Recommended practices for safety after the winch has been used.
Identifies and illustrates the various parts and components of the winch.
Details the components and function of the wireless remote control.
Explains factors influencing winch performance like current draw and line speed.
Provides detailed ratings and specifications for XLT 7.0 and XLT 10.0 models.
Lists parts to inspect before beginning the installation process.
Specifies bolt sizes, quantities, and torque requirements for mounting the winch.
Guides on choosing a secure and appropriate location for winch installation.
Describes the process of mounting the winch using carriage bolts and lock nuts.
Advises on battery requirements and lead wire gauge based on length.
Offers guidance and warnings on safely routing battery cables.
Explains the steps for connecting the winch wiring using quick connect plugs.
Describes the meaning of the indicator light on the wireless remote.
Provides step-by-step instructions for pairing the wireless remote to the winch.
Offers solutions for common issues encountered during wireless remote pairing.
Safety and operational guidelines for spooling the winch strap while under load.
Explains the risks of overloading the winch and potential motor damage from heat buildup.
Emphasizes safe operating positions and precautions when working with the winch.
Details how to engage and disengage the winch clutch for free-spooling and winching.
Presents tables detailing rated capacities for pull, roll, and marine applications.
Provides a guide for maximum allowable weight for rolling loads at different ramp inclinations.
Offers essential guidelines to ensure long-term performance and prevent premature wear.
Step-by-step guide for replacing the winch strap, including disassembly and reassembly.
A checklist for performing regular maintenance and inspections before, during, and after use.
Information on winch lubrication, including what to use and what to avoid.
Information regarding product compliance with legal directives and warnings.
Outlines the terms, coverage, limitations, and obligations of the product warranty.
General
