63
VCR functions
EN
Playback
1 Press [STANDBY-ON] to turn on the
unit.
To play back a tape, turn on the TV and be sure to
select the input to which the unit is connected.
2 Press [VCR ].
3 Insert a prerecorded tape, then press
[PLAY P] to begin playback.
4 During playback, press [PAUSE p].
Playback will be paused and sound will be muted.
5 Press [PLAY P] to resume playback.
6 Press [STOP S] to stop playback.
7 Press [STOP / EJECT SO] on the
unit to eject the tape.
Note
• When a tape without record tab is inserted, the unit
will start playback automatically.
• Tracking will be automatically adjusted upon
playback. To adjust the tracking manually, press
[PROG. U / D].
Recording and one-touch timer
recording (OTR)
Basic Recording
Before recording, make sure:
• The desired channel is selected by pressing the
number buttons on the remote control.
• There is a tape with a record tab in the unit.
• The desired recording speed is selected in SP
(standard play) or LP (long play) mode by pressing
[REC SPEED] on the remote control.
• Refer to page 28 for instructions on timer recording.
1 Turn on the unit and insert a
recordable tape.
Make sure that the TV input is set on the unit.
2 Press [VCR ].
3 Select the recording speed using
[REC SPEED].
• The desired recording speed is selected in SP
(standard play) or LP (long play) mode by
pressing [REC SPEED].
4 Select the desired channel to record
using [PROG. U / D] or
[the Number buttons].
5 Press [REC / OTR] to start recording.
To temporarily stop recording or to resume it,
press [PAUSE p]. After the unit has been in
pause mode for 5 minutes, it will stop
automatically to protect the tape and the video
head from damage.
6 Press [STOP S] when the recording
is completed.
VCR functions
VCRVCR
Tape speed Recording / Playback Time
Type of tape E60 E120 E180
SP mode 1 hour 2 hours 3 hours
LP mode 2 hours 4 hours 6 hours
VCRVCR
DRV_B2737_B2734.book Page 63 Thursday, March 31, 2005 10:04 PM
To Next Page
Loading...
