Funn MAMBA - Step 5: Extract Bearing

WWW.FUNNMTB.COM
TAIPAN PEDALS 2024.04.15 / REV. 0
WWW.FUNNMTB.COM
BEARING / Axle Replacement
step 5 :
04
MAMBA PEDALS
MAMBA PEDALS 2024.04.22 / REV. 0
Secure the M4 nut with a 7mm open-end wrench, and use the 3mm hex key to tighten
the M4 bolt. Continue tightening the M4 bolt until the bearing is extracted.
3mm hex key
3mm hex key