2. WIRING
2-16
DIP switch setting
Set DIP switch #4 on the MAIN Board as follows:
MAIN Board
10P6950
S4
EXT KP(J11)
Processor unit, DIP switch S4 location
DIP switch No.1 sonar No.2 sonar
S4-#2 ON -
S4-#1 - OFF
When synchronizing No.2 sonar to No.1 sonar, set ON at [EXT KP SYNC] item on the
setting menu. Refer to the operator’s manual for the procedure.
To Next Page
Loading...
