Furuno CSH-8L - NMEA Version Setting

3. ADJUSTMENT
3-8
3.5 NMEA Version Setting
Change the jumper block setting in the processor unit according to NMEA version to output.
MAIN Board
10P6950
J22J25
Location of jumper block J22 and J25
Jumper NMEA Ver1.5 CIF or NMEA Ver2.0 Port
J22 1-2 (Default setting) 2-3 NMEA1/CIF1
J25 1-2 (Default setting) 2-3 NMEA2/CIF2