Furuno DRS4D-NXT - 1.3 Wiring

1. INSTALLATION
7
1.3 Wiring
1.3.1 Power requirement
The DRS4D-NXT requires either 12 VDC or 24 VDC power. Connect the red cable to
the positive terminal of ship’s battery; the blue cable to the negative terminal. The
black cable is a shielding cable for grounding.
1.3.2 Network cable connection
Connect the network cable to the multi function display device*.
*Hereafter TZTL12F, TZTL15F, TZT9, TZT14 and TZTBB are referred to as “multi
function display device”.