Furuno DRS4D - Page 7

v
Optional supply
*: After the wiring, it is required to wind the vinyl tape around the LAN connector to waterproof.
Name Type Code No. Remarks
Power Supply
Unit
PSU-012 -
PSU-017 - For DRS2D/4D
Gasket OP03-203 001-025-290
For DRS2D/4D, φ10 NMEA2000 cable
OP03-205 001-025-790
For DRS4A/6A, φ10 NMEA2000 cable
OP03-206 001-035-290
For DRS25A, φ10 NMEA2000 cable
Resister Assy OP03-204 001-025-300 For NMEA2000 connection with a unit
Radome
Mount
OP03-208 001-078-340 For DRS4D
OP03-209 001-078-350 For DRS2D
Joint Box* TL-CAT-012 000-167-140-10 For LAN cable extension
LAN Cable MOD-Z072-020+ 000-167-175-10 2 m
MOD-Z072-050+ 000-167-176-10 5 m
MOD-Z072-100+ 000-167-177-10 10 m
Cable Assy M12-05BFFM-010 000-167-965-10
NMEA2000, φ6, w/connector, 1 m
M12-05BFFM-020 000-167-966-10
NMEA2000, φ6, w/connector, 2 m
M12-05BFFM-060 000-167-967-10
NMEA2000, φ6, w/connector, 6 m
CB-05BFFM-010 000-167-971-10
NMEA2000, φ10, w/connector, 1 m
CB-05BFFM-020 000-167-972-10
NMEA2000, φ10, w/connector, 2 m
CB-05BFFM-060 000-167-973-10
NMEA2000, φ10, w/connector, 6 m