Need help?Do you have a question about the Furuno FELCOM 15 and is the answer not in the manual?
General| Brand | Furuno |
|---|---|
| Model | FELCOM 15 |
| Category | Marine Radar |
| Language | English |
Details installation check items for the equipment.
Lists check items for various settings of the unit.
Outlines procedures for testing communication functions like login and PV.
Explains the system menu settings accessible via the DTE port.
Describes how to configure units like DMC-5, IC-305, IC-306 via command window.
Explains the PV test procedure for checking MES function and exchanging signals.
Outlines the process for performing self-tests and interpreting trouble messages.
Describes items displayed on the status monitor and their meanings.
Explains the function of DIP switches and reset switches on the boards.
Provides instructions for replacing the backup battery on the TERM CPU board.
Details the procedure for testing the distress alert function.
Describes how to save and load system settings to/from a floppy disk.
Explains the procedure for updating the TERM CPU and RF CON/CPU software.
Explains the various parts of the status display on the terminal unit.
Illustrates the flow of distress alert signals between MES, LES, and NCS.
Explains the network setup options within the system menu.
Covers connecting FELCOM 15 to a single PC or multiple PCs via LAN.
Provides step-by-step instructions for setting up Outlook Express for e-mail.
Explains how to check network connectivity using the Ping command and SMTP errors.
To Next Page
