4.1 System menu (F8)
4-5
4. Terminal Setup: [F8]-4
Item Contents Description
YY - MM - DD
MMM - DD - YY
Date Disp.
Form
DD - MMM - YY
Setting for the way of the data display such as the one
in the status display and the time stamp for the Log
menu.
Currency Unit SDR to OTHER
Setting for the currency unit registered by the LES list.
The communication rate is shown in the Transmit
Message (F3-1).
Screen Saver ON/OFF
ON/OFF setting for the Screen Saver. When it is set to
ON, the screen saver appears if the system has not
been used for 10 minutes.
Window Color
Setup
Setting for the window color.
Window Color
Default Color
Setting for the window color. Returns the color to the
default.
5. EGC Setup: [F8]-5
Item Contents Description
Additional Position Area set by Pos.
Navarea Inputs Navarea
Fixed Area
“Fixed Area” is where you enter fixed areas (max.
3) for chart correction service. However, this service
is not yet available; enter no data.
Receive EGC
Area
Way point
ON/ OFF setting for the WP area designated by the
navigational system.
Station Code Selects NAVTEX station.
NAVTEX
Ice Report to
QRU (no message)
ON/ OFF setting for the receiving message type.
6. Auto Mode Setup: [F8]-6
Item Contents Description
Auto Log
Print
ON/OFF
When set to ON, Log is automatically printed out
every time the date is changed.
Receive Alarm ON /OFF
ON/ OFF setting for the message receiving alarm.
When receiving the message, the alarm is released
to IC-215 and the ALARM unit. All alarm is stopped
by the operation of [F10]:STOP ALM of IC-215.
To Next Page
Loading...
Need help?
General
