Furuno FELCOM 15 - Display of Status Display Part

7.1 Status display
7-7
7.1.5 Display of status display part
1. “Sending Distress Alert” : When the distress alert is sent.
2. “Distress Acknowledgement Received”:
When the distress acknowledgement from the LES is received after sending the distress
alert.
3. “Distress Message Call Activated”:
When the message which category is set to distress is sent.
4. “Distress Message Call Acknowledged”:
When the distress message acknowledgement from the LES is received after sending
the message which category is set to distress.
5. Distress buttons are under test. Cancel the test mode if a real distress alert needs to send.
When during the distress button test mode. ([F7]-7-4).