Furuno FELCOM 15 Service Manual

4.1 System menu (F8)
4-7
9. Configuration: [F8]-9
Item Contents Description
Station Group
When registering the station more than two, the
station is divided into groups by this setting.
This function is available when the station for
sending the message is selected by Transmit
Message ([F3]-1).
Station Name Inputs the station name.
Destination Type
Setting by which Destination Type the message is
sent. Selects from TELEX to SPEC (Prefixed).
Prefix code
Inputs when Prefix is selected from Destination
Type.
Country/Ocean Code
Registers the country or the ocean code of the
station for sending the message.
Station ID
Registers the station number of the station for
sending the message.
Modem Type
T30 (FAX)
When Destination Type is set to FAX, select T30
(FAX).
E-mail Address Registers the E-mail address.
1. Station List
(Max.99 stations)
Remark Sets to Remark if necessary.
Name Registers LES name.
ID Registers LES number.
Remark Sets to Remark if necessary.
2. LES List
(Max. 64 stations
x 4)
Charge
Registers the communication charge of each
Destination Type if necessary.
3.EGC
channel List
Max. 4ch x 4
4.NCS
Channel List
Max. 20ch x 4
Registers the additional channel.
Service Station
Name
Registers the LES name.
Service ID
(Enter ID: max. 9 char.)
EX) Comsat: INET, Station12: 400
LES ID (AORW) to
IOR
Registers the LES number of each service region.
To:
Cc:
Subject:
Separator
Registers according to the header format of the
LES.
5.E-mail
Service List
(Max. 16 stations)
Attach File (MIME)
Setting which code is used when the attached file is
sent.
Code: OFF, BASE64 and UUENCODE
When set to off, the attached file is not sent.
Save to FD
6. Save/Load
Load from FD
See page 5-24

Furuno FELCOM 15 Specifications

General

Brand	Furuno
Model	FELCOM 15
Category	Marine Radar
Language	English