Furuno FELCOM 15 - Chapter 7. Messages; 7.1 Status display

7-1
7.1 Status display
7.1.1 Display of bottom left
The display of “a” part
1. “DCE F15 Ver.0x”: Normally displaying the version number of RF CON/CPU board.
Note) “FFA” is added when the device is FFA version.
2. “Running Report Program (POLL)”: During Program Report by Polling.
Note) This message is not displayed by FFA version.
3. When detecting the error, the following messages appear.
“TROUBLE: ANT power voltage abnormality”
“TROUBLE: ALARM UNIT Fault”
“TROUBLE: DMC Connection abnormality”
“TROUBLE: DISTRESS ALERT UNIT Fault”
“TROUBLE: Synthesizer UNLOCK”
“TROUBLE: Carrier Power Level”
“TROUBLE: GPS module”
“Memory full for received msg.”
4. “TX ON”: During transmitting.
Note) This message is not displayed by FFA version.
Chapter 7. Messages
c
b
a