Furuno FELCOM 15 - AP4.9.4 Selective Forwarding

AP4.9 Function settings
AP4-18
AP4.9.4 Selective forwarding
This function is used by the sender when sending the message. Make sure that
all senders know how to write the keyword and the mail address.
The message can be forwarded to the address which appears just after a keyword.
For example, if the keyword is “/+forward+/” and the address is
“felcom@ship.furuno.co.jp”,
“/+forward+/felcom@ship.furuno.co.jp” is typed on the top of the message.
Note)
1) Do not enter a space between the keyword and the mail address.
2) Up to 10 mail address can be entered.
- Mail server IP address : 172.31.16.10
- LAN domain name : ship.furuno.co.jp
- Mail address to forward to : felcom@ship.furuno.co.jp (IP Address: 172.31.16.2)
- Keyword : /+forward+/
To: ****@***.***
Subject:
……
..
Test mail
/+forward+/443109910@ship.furuno.co.jp
This is test message
……
To: ****@***.***
Subject:
……
..
Test mail
This is test message
……
To: ****@***.***
Subject:
……
..
Test mail
/+forward+/felcom@ship.furuno.co.jp
/+forward+/smith@ship.furuno.co.jp
This is test message
……
MSG.1
MSG. 3
MSG. 2