Furuno FAR-2107 Series - Cable

1.2 Configuration
1-9
1.2.3 Cable
1. Cable length for each unit
Fig. 1.2.2 Cable Length for Each Unit
2. LAN cable
The cross cable is used when RPU-013 and RPU-013 are connected or RPU-013 and
CU-200 without a HUB are connected.
When the HUB-100 is used, either a straight cable or cross cable can be used between each
unit. All the ports of HU-100 are automatically recognized straight/cross cable (Auto-MDIX).
Fig. 1.2.3 LAN Cable
RPU-013
RPU-013
J602:
Key
RCU-014
MU-201CR
MU-231CR
RCU-015
RCU-016
J522:
Remote
J502:
Remote
J501:
Prossessor
J501:
Prossessor
J521:
Prossessor
CU-200
HUB-100
Power
SW
Power
SW
or
1.5/10/20/30m
1.5/10/20/30m
1.5/10/20/30m
Max. 31.5m
5/10m
DVI-D
NETWORK
DVI-D
FURUNO
RW-9600
15/30/40/50m, Max. 100m
10/20/30m
DVI-D/D
SIGNAL LINK 5M/10M
(LAN cable: FR-FTPC-CV )
10/20/30m
(LAN cable: FR-FTPC-CV )
(Power cable: MJ-A3SPF0015-100)
(LAN cable: FR-FTPC-CY)
(XH10P-W-5P-A)
(XH10P-W-5P)
10m
10/20/30m
SPU p.c.b
LAN
No.1 FAR-2xx7 series
NET-100
SPU p.c.b
LAN
LAN
No.2 FAR-2xx7 series
NET-100
SPU p.c.b
No.x FAR-2xx7 series
NET-100
LAN
CARD CPUp.c.b
CU-200
NET-100
SPU p.c.b
LAN
No.x FAR-xx7 series
NET-100
CARD CPUp.c.b
LAN
LAN
LAN
CU-200
HUB-100
NET-100
8 ports
100Base-Tx
100Base-Tx
100Base-Tx
100Base-Tx
cross cable
cross cable
or
straight cable
cross cable
or
straight cable
INS