1. OPERATIONAL OVERVIEW
1-85
5. Select the appropriate item to adjust.
6. Spin the scrollwheel, or press the appropriate menu number to change or adjust
the settings, then left-click, or press the ENTER MARK key to confirm the setting.
7. Close the menu.
Menu item Description
Page 1
[2 ECHO COLOR] Changes the color used to display echoes. The avail-
able colors are: [YEL] (yellow), [GRN] (green), [WHT]
(white), [AMB]* (amber), [M-GRN]* (mutli-green), [M-
CYA]* (multi-cyan).
*: Shown for B/W-types only.
If you select [M-GRN] or [M-CYA], the echo color chang-
es depending on the echo strength.
• [M-GRN]: red for strong echoes, ranging through to
green for weak echoes.
• [M-CYA]: red for strong echoes, ranging through to
green for weak echoes.
[3 PALETTE] Changes the color scheme (see subsection 1.45.3).
[4 CONTROL PANEL] Adjusts control panel back-light brilliance.
[5 CHARACTERS] Adjusts on-screen text brilliance.
[6 CURSOR] Adjusts cursor brilliance.
[7 ECHOES] Adjusts the echo brilliance.
[8 TRAILS] Adjusts echo trail brilliance.
[9 HL] Adjusts heading line brilliance.
Page 2
[2 RANGE RINGS] Adjusts range ring brilliance.
[3 BEARING CURSOR] Adjusts bearing cursor brilliance.
[4 EBL] Adjusts EBL line brilliance.
[5 VRM] Adjusts VRM line brilliance.
[6 PI LINES] Adjusts PI line brilliance.
[7 TT SYMBOLS] Adjusts target trail symbol brilliance.
[8 AIS SYMBOLS] Adjusts AIS symbol brilliance.
[9 L/L GRID] Adjusts latitude/longitude grid brilliance.
Page 3
[2 MARKS] Adjusts latitude/longitude grid brilliance.
[3 CHART] Adjusts chart brilliance. (Appears only for A/B/W-types
with Radar Plotter functionality.)
To Next Page
Loading...
