Furuno FAR-2807 Series - Page 182

4. AIS OPERATION
4-8
4. Select appropriate navigation status number referring to the information
below then push left button.
00: Underway using engine (default)
01: At anchor
02: Not under command
03: Restricted manoeuverability
04: Constrained by her draft
05: Moored
06: Aground
07: Engaged in fishing
08: Under way sailing
09: Reserved for high speed craft (HSC)
10: Reserved for wing in ground (WIG, for example, hydrofoil)
11-13: Reserved for future use
14: AIS SART (No use)
15: Not defined
5. Select 3 ETA then push the left button.
6. Use the scrollwheel to enter estimated date and time of arrival, in order of
day (two digits), month, year (four digits) and time. Push the scrollwheel after
entering the data.
7. Select 4 DESTINATION.
8. Enter destination: Select alphanumeric character, push the scrollwheel to
enter.
9. Select 5 DRAUGHT.
10. Roll the scrollwheel to set ship’s draught (setting range: 0-25.5 m) then push
the scrollwheel.
11. Select 6 CREW.
12. Roll the scrollwheel to set number of crew (0–8191) then push the
scrollwheel.
13. Push the right button to close the menu.