EasyManua.ls Logo

Furuno FAR-2807 Series - Monitor Unit

Furuno FAR-2807 Series
312 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FURUNO
FAR-21x7(-BB)/28x7 SERIES
SP-2 E3519S01P-M
3. MONITOR UNIT
1. Screen Raster scan, daylight bright, yellow or green echoes in 32 levels
2. Display
FAR-2107(-BB)
series
FAR-2107
series
FAR-2107
series
FAR-2807
series
Size, model 17-inch color LCD,
MU-170C
19-inch color LCD,
MU-190
20.1-inch color LCD,
MU-201CR
23.1-inch color LCD
FAR-28x7:
MU-231CR, MU-231
Display area
(mm)
338 x 270 376.32 x 301.06 399.36 x 319.49 470.4 x 352.8
Resolution 1280 x 1024
pixels
1280 x 1024
pixels
1280 x 1024
pixels
1600 x 1200 pixels
Effective
radar
diameter
260 mm
(H: 64 kHz;
V: 60 Hz)
290 mm
(H: 64 kHz;
V: 60 Hz)
308 mm
(H: 64 kHz, V: 60
Hz)
340 mm
(H: 75 kHz, V: 60
Hz)
Viewable
range
920 mm 1020 mm 1080 mm 1200 mm
3. Minimum range 22 m
4. Range discrimination 26 m
5. Range scales (nm), ring interval
Range (nm) 0.125 0.25 0.5 0.75 1.5 2 3 4 6 8 12
Ring interval (nm) 0.025 0.05 0.1 0.25 0.25 0.5 0.5 1 1 2 2
No. of rings 5 5 5 3 6 6 6 4 6 4 6
16 24 32 48 72 96 120
4 4 8 8 12 16 20
4 6 4 6 6 6 6
6. Range accuracy 1% of the maximum range of the scale in use or 10 m, whichever
is greater
7. Bearing discrimination 0.98° (XN5A), 2.1° (XN12AF), 1.5° (XN20AF), 1.2° (XN24AF),
2.0° (SN36AF)
8. Bearing accuracy ±1°
9. Presentation mode Head-up, Cursor Gyro, North-up, Course-up, True Motion
(sea or ground stabilization in True Motion)
10. Target tracking (TT)
Auto or Manual acquisition: 100 targets in 0.2-24(32) nm
Auto tracking on all acquired targets
Tracking: 5/10 pts on all targets
11. AIS
Capacity: 1000 targets, Tracking: 10 pts on all targets
Time of vector: Off/3/1-50 minutes
12. Radar map 20,000 pts in radar mode, 6000 pts on IC card in chart mode
13. Acquisition zone 2 zones
14. Interswitch function Selectable from menu
4. INTERFACE
1. Heading signal input - Synchro signal (20-100 VDC, 20-135 VAC 50/60/400/500 Hz),
- Stepper signal (20-100 V), built-in interface (option) required,
- AD-10 format or IEC 61162-2
2. Speed log IEC 61162-1
3. AIS IEC 61162-2

Table of Contents

Other manuals for Furuno FAR-2807 Series

Related product manuals