1. RADAR OPERATION
1-112
1.56.2 How to store/recall settings
1. Right-click the USER SETTING box to open the USER SETTING menu.
2. To save settings select [USER 1 SAVE] or [USER 2 SAVE] as appropriate.
3. Select [YES] to store the settings.
4. To load saved settings, select [USER 1 LOAD] or [USER 2 LOAD] as
appropriate.
5. Select [YES] to load the settings.
Note 1: If the newly loaded settings cannot be applied to the items not shown in
the table above, (EG: Gain, A/C SEA, A/C Rain, etc.) then these items keep their
previous settings.
Note 2: TT tracking is continued after the new settings are loaded.
Note 3: The radar map displays the same map as before the settings were
loaded.
To Next Page
Loading...
