Furuno FAR-3220-NXT-BB User Manual

INSTRUCTION MANUAL
SETTING AND ADJUSTMENTS
Model FAR-3210/FAR-3220/FAR-3220-NXT/FAR-3230S/
FAR-3230S-SSD/FAR-3310/FAR-3320/FAR-3320-NXT/
FAR-3330S/FAR-3330S-SSD/FAR-3320W/
FAR-3330SW/FAR-3210-BB/FAR-3220-BB/
FAR-3220-NXT-BB/FAR-3230S-BB/
FAR-3230S-SSD-BB/FAR-3220W-BB/FAR-3230SW-BB
This manual is solely for use by the installer. Under no circumstances
shall this manual be released to the user.
The installer shall remove this manual from the vessel after installation.
This manual contains no password data. Obtain password data from
FURUNO before beginning the installation.
www.furuno.com

Furuno FAR-3220-NXT-BB Specifications

General

Brand	Furuno
Model	FAR-3220-NXT-BB
Category	Marine Radar
Language	English

Summary

1. INITIAL SETTING AND ADJUSTMENT

1.1 How to Access the Common Installation Settings Menu

Describes accessing the common installation settings menu via web browser.

1.2 [Basic Setting] Menu

Covers the basic settings menu for configuration.

1.3 [Own Ship Setting] Menu

Allows entering own ship parameters and sensor information.

1.4 [Installation Parameters] Menu

Sets signals and input data for sensors.

1.5 [CCRS] Menu

Configures CCRS settings, including data source selection.

1.6 [TCS] Menu

Selects data format for route data output to external equipment.

1.7 [AMS] Menu

1.8 [Alert Define List] Menu

1.10 [Save and Sync] Menu

1.11 [Radar Installation] Menu

1.12 [System Monitor] Menu

1.13 [Software Update] Menu

1.14 [Factory Test & Default] Menu

2. SETTING FOR SENSOR ADAPTER

2.1 How to Set the Equipment ID

2.3 How to Update the Firmware (MC-3000S)

3. HUB-3000 IGMP Querier

Procedure