www.furuno.com
ll brand and product names are trademarks, registered trademarks or service marks of their respective holders.
Installation Manual
CHART RADAR
Model
FAR-3210(-BB)/3220(-BB)/3310/3320
/
FAR-3220-NXT(-BB)/3320-NXT
(Product Name: Marine Radar)
SAFETY INSTRUCTIONS ........................i
SYSTEM CONFIGURATION ..................iii
EQUIPMENT LISTS..............................viii
1. INSTALLATION...............................1-1
1.1 Antenna Unit .......................................1-1
1.2 Monitor Unit.........................................1-7
1.3 Radar Control Unit,
Trackball Control Unit .........................1-7
1.4 Power Supply Unit ............................1-10
1.5 Processor Unit ..................................1-11
1.6 Sensor Adapters (option)..................1-12
1.7 Intelligent HUB (option).....................1-13
1.8 Switching Hub (option)......................1-15
1.9 Junction Box (option) ........................1-15
2. WIRING............................................2-1
2.1 Overview .............................................2-1
2.2 Antenna Unit .......................................2-4
2.3 Processor Unit ..................................2-12
2.4 Power Supply Unit ............................2-22
2.5 Monitor Unit.......................................2-26
2.6 Sensor Adapters (option)..................2-27
2.7 LAN Signal Converter Kit (option).....2-42
2.8 Junction Box (option) ........................2-48
2.9 Intelligent HUB (option).....................2-49
2.10 How to Extend the Control Unit Cable
(option)..............................................2-50
2.11 VDR Connection ...............................2-54
3. SETTINGS AND ADJUSTMENTS ..3-1
3.1 How to Access the Radar Installation
Menu3-1
3.2 How to Align the Heading ...................3-1
3.3 How to Adjust the Sweep Timing ........3-2
3.4 How to Suppress Main Bang ..............3-3
3.5 Dual Radar Display.............................3-3
3.6 Other Settings.....................................3-6
3.7 Network Transmission Setting Between
ECDIS and Radar3-13
3.8
How to Set the Forwarding Distance
...3-13
3.9 Synchronization With Ship’s Clock ...3-14
3.10 How to Change the Display Color for
Sensor Data Based on Integrity ........3-15
3.11 How to display the [Echo] page ........3-16
3.12 Web Setting Menu ............................3-16
3.13 How to Set Up the Back-up ECDIS...3-16
4. INPUT/OUTPUT DATA ...................4-1
4.1 Processor Unit ....................................4-1
4.2 IEC 61162 Sentences .........................4-2
APPENDIX 1 JIS CABLE GUIDE.....AP-1
APPENDIX 2 ROD TERMINALS ......AP-2
APPENDIX 3
DIGITAL INTERFACE
..AP-7
PACKING LISTS ................................. A-1
OURLINE DRAWINGS........................ D-1
INTERCONNECTION DIAGRAMS ..... S-1
To Next Page
Need help?
General
