Furuno FE-700 - 1.5 Receiving Circuit

6
Enla ging data o inte e t
You can enlarge one of the data indications as
follows:
1. Press the [䦱] or [䦻] key to select the data
you want to enlarge. urrent section is
circumscribed with the blue cursor. For
example, select the depth cell.
2. Press the [+] key.
DEPTH
17.2
m
DEPTH AFT FORE
17.2 17.2
m m
(Single display) (Dual display)
. To return to the original display, press the [ - ]
key.
1.6.6 HELP display
This mode provides information about keys.
Press desired key to obtain the corresponding
information. The example below shows help
information for TE ALAR .
HELP EN
DRAFT
TE
ALAR
DI BRILL
A TO OLOR
- +
PRESS KEY.
TE ALAR
To set or
acknowledge alarms:
1. Press TE ALAR
key.
2. Press [
- ] or [+]
key to set alarm
depth.
. Press TE ALAR
key to silence
the alarm.
PRESS KEY.
1.6.7 MENU di la
The menu provides functions which normally do
not re uire fre uent adustment. For details see
hapter 2.
CLUTTER
AUTO (0-16)
INTERFERENCE REJECT
OFF IR1 IR2 IR3
PICTURE ADVANCE
SLOW FAST
TREND INDICATOR
OFF ON
INTERVAL
5s 1min 2 min
1/2
: To select item
- + : To set option
(Page 1/2)
Press the [䦻
] key when the cursor is on the
“INTERVAL”, and the following appears.
ECHO XDR*
FORE AFT
CAUTION!
SYSTEM MENU IS ONLY
FOR INSTALLATION. DO
NOT CHANGE SETTINGS.
GO TO SYSTEM MENU?
NO YES
2/2
: To select item
- + : To set option
(Page 2/2)
*For Dual display, "HISTORY XDR" appears.