Do you have a question about the Furuno FELCOM19 Inmarsat Mini-C MES and is the answer not in the manual?
Brand | Furuno |
---|---|
Model | FELCOM19 Inmarsat Mini-C MES |
Category | Marine Equipment |
Language | English |
Details the communication unit, including power control, diagnostics, and status LEDs.
Explains the operation of the terminal unit (PC), including software installation and key descriptions.
Describes the standby display, its indications, and the synchronization process.
Lists and explains common error messages and alerts displayed by the terminal unit.
Covers system setup, including confirming the main terminal and configuring system parameters.
Details how to set up the PC window, including connection points and display formats.
Explains the procedure for logging into and out of the Inmarsat C system.
Explains procedures for exporting and importing system settings for backup and transfer.
Details the process of preparing routine and confidential files for messages.
Explains the methods for saving files, either retaining or clearing the screen.
Provides instructions on opening files stored on the hard disk and switching between them.
Guides on preparing and sending messages via telex, e-mail, fax, or SMS.
Explains how to receive messages, set alarms, display, print, save, and delete them.
Explains automatic data transmission and message reporting from the ship to the home office.
Describes how to make polling commands and register PIN codes for data retrieval.
Covers basic checks and maintenance procedures for the FELCOM unit and antenna.
Details diagnostic tests, including self-test at power-on and comprehensive diagnostic tests.
Explains the Performance Verification (PV) test sequence and procedure for confirming functionality.
Describes the system status monitor, which displays date, time, equipment status, and navigation data.
Provides instructions on how to safely replace the fuse in the power cable.
Lists and explains common error messages and troubleshooting actions.